The creators of Exothermic Welding are justifying the bonding process very well

Exothermic welding is the perennial solution for the bonding connection of two different metals. It offers permanent molecular bonding to the Earthing system. The reliability of the bonding connection always play a critical role in electrical systems. It has been observed that over the period of time due to ageing, low maintenance and environmental conditions the joints made of clamping, crimping, bolting etc. get corroded/rusted or loosen and become low performing joints.

Exothermic welding system meets UL 467, IEEE 80, 837 and 1100, National Electrical safety Code. Moreover it offers complete surface contact which minimizes the probability of occurrence of oxidation on the surface of metal as a result of which corrosion minimizes to a great extent. Exothermic Weld Joints can bear temperature of more than 10830C and their connection doesn’t loosen with time. 



As soon as the popularity of this bonding process is increasing, the number of manufacturers is also increasing in the market. There is much confusion for a buyer to select between different vendors as everyone is providing same thing. But it is very important to track the past record of the vendor which you are selecting.

JAMWELD, an exothermic welding system has proved as a robust solution for removing every kind of confusion from buyer’s mind. It complies all the standards applicable to exothermic welding process.

Advantages of JAMWELD
•      Ageing free: JAMWELD offers permanent molecular bonding which never gets affected by corrosion and offers more life to the joints and then the life of conductor. 

•     Cost-effective: It is a cost effective solution as it lasts for years based on fit and forget topology. It also does not need to repair connections.

•     Highly Portable: JAMWELD offers portability. Also it does not require any power source to make electrical joints.

•     Tolerant to Repeated fault currents: Unlike other connections, this connection never holds the current as they have 100% contact surface and thus they withstand repeated high surges without deterioration of joints.

•     Current Carrying Capacity: JAMWELD has very high current carrying capacity equal to that of the copper clad conductor.

Comments

Post a Comment

Popular posts from this blog

Permanent Joints With Exothermic Welding Kit

Image
The guaranteed results when it comes to jointing is always labeled as the exothermic weld joints. Jointing is required in various shapes as per the concern. To build such strong connection joints, JAMWELD toolkit creates a vital role. The incorporation of the desire joints is accessible with the help of exothermic welding kit. The kit contains the abundant components that provide stable solution for endless jointing. 1.        Exothermic Welding powder   In the welding powder, the mixture of the metal oxide and copper compound both builds a sturdy joint that create an abiding connection. 2.        Exothermic Welding Mould The mould is constructed with a graphite mould that oversee the molten weld flow and form an exothermic weld joint. 3.        Exothermic Welding Handle Clamps In the exothermic welding, the handle clamp is a safe initiate that should be used properly during the formation of the joint. It helps to carry the mould tightly. 4.        Exothermic
Read more

Exothermic Welding Offers Better Electrical Joints Complying IEEE 837

Image
The main purpose of the earthing system is to provide a path for fault currents to flow and dissipate into the ground which work as safety measure to protect human life as well as equipment. The joint and connection plays an important role in an effective earthing system. The JAM WELD Exothermic welding kit provides a definite molecular bonding among two or more metallic conductors to join them permanently having same or different cross-sectional area. This can be held by the process of exothermic reaction. The difficulties that have been encountered in conventional method of welding and jointing are: - jointing failure due to less contact surface area and aging due to atmospheric corrosion. These problems are removed when exothermic solution comes in practice. It requires no external heat or force in its procedure. Unlike mechanical joints, the connection provides 100% contact surface area. This jointing can be made in between copper to copper, copper to steel etc. The exothermic
Read more

Exothermic welding to enhance the integrity and longevity of the weld

Image
Every one now is familiar with the earthing techniques and the components used in the technique. Earthing technique and electrical safety provisions is around us since thousands of years. Conductor dug deep inside an earth pit surrounded by soil enhancing compound can deliver earth connection. This connection to the conduction part of the ground to achieve electrical contact is referred to as earthing.It is a necessity in almost every industry for every electrical/electronic component. Electrical faults are unpredictable issue which can be disastrous if there is no appropriate protection system installed.Connection of the equipments to the ground is a tedious process and need to given proper care as once the connections are established, they are expected to stay so for a really longer service life. Exothermic welding system is the only permanent way to joint two or more dissimilar conductors. Conventionally, we made use of techniques such as crimping, brazing, bolting, and va
Read more